|CG Permanent magnetic roller|
Permanent magnetic roller
1) The magnetic field span of roller surface is large, which is convenient for selection. It can be divided into ordinary magnetic field 150-250mt and special strong magnetic field 300-500mt.
2) Stable magnetic field and long service life.
3) The meaning of model composition: cg-10160, cgz-10160, cgb-10160
Active magnetic separator drum (B-C) diameter 16 mm-1 600 mm
CG Permanent magnetic roller is mainly used for the following purposes:
1. The coarse separation of lean iron ore after coarse crushing or medium crushing can eliminate the waste rock such as surrounding rock, improve the grade and reduce the load of the next process.
2. It is used to separate the raw ore which is not fully reduced in the reduction closed-circuit roasting operation of hematite and return it to reburning.
3. It is used to remove the mixed iron in ceramic mud and improve the quality of ceramic products.
4. Iron removal for coal burning, foundry sand, refractory and other industries.
The permanent magnetic drum is usually used in the preconcentration operation before ore entering the fine crushing or grinding to remove gangue, surrounding rock and other waste rock mixed into the ore. The magnetic drum is usually used as the transmission drum of the transport belt. When the material passes through the magnetic drum on the transport belt, it will be separated. When the magnetic material moves to the top of the drum, it will be attracted and fall off automatically when it turns to the bottom. The non-magnetic material will fall directly along the horizontal parabola track, and the magnetic material and non-magnetic material will enter into different receiving hoppers respectively. It can be divided into permanent magnet pulley and permanent magnet roller according to the angle of magnetic system. The magnetic envelope angle of the magnetic pulley is 360 掳 and the magnetic pole group is evenly distributed in the circumference of the cylinder, forming a full circle magnetic system. The magnetic system and the cylinder rotate with the belt at the same speed, which is stable, safe and reliable. Because the principle of ore unloading is realized by the drag force of the belt, it is generally used for the permanent magnetic drum with magnetic field strength below 180mt to reduce the damage to the belt.
Specifications and main technical parameters of CG series magnetic roller
CG CGB CGZbandwidth锛圔锛?/p>
mmCenter distance of bearing seat锛圠锛?/p>
mmOutlet shaft diameter锛坉锛?/p>
mmBelt speed m/sMagnetic induction intensity of roller surface mTWeight Kg
CG-506350050063085070鈮?.5General magnetic field锛?50锝?00
Medium magnetic field锛?/p>
High magnetic field:
Strong magnetic field锛?/p>
CG-1016010001704900Dry Drum Separators manufacturers